In Greensboro, metal roofing installation, repair, and replacement costs depend on factors like roof size, material type, and project complexity. Understanding these variables helps you budget accurately and avoid surprises, and we're here to guide you with transparent pricing every step of the way.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Greensboro and the Piedmont Triad: panel systems engineered for hot, humid summers, hail and falling limbs, installed over synthetic underlayment with proper ventilation and carefully lapped flashing for a long service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, a premium choice for Greensboro homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to back out as summer heat and winter cold flex the roof, plus a slick surface that sheds pine needles, oak leaves and occasional ice. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of hail-beaten shingle, moss-covered or end-of-life metal roofs: old roofing hauled away, decking inspected for rot and repaired, then a complete new metal system installed. Many North Carolina carriers recognize impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles with no tear-off, less waste and lower cost. Popular on Greensboro brick ranches. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before a summer thunderstorm or hurricane remnant turns a small gap into interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and chimney transitions) and fixed right, not just caulked over. Emergency tarping available after limb falls and heavy rain. |
| Screw Replacement & Re-Fastening | From $750 | Piedmont heat and humidity cycle metal roofs daily, so screws back out and washers crack on older exposed-fastener roofs, especially on farm buildings and mill-village cottages. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V) is the budget-friendly workhorse for homes, carports, barns and workshops across Guilford County. Quality panels in durable colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that give the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Greensboro homeowners who want metal performance without the standing seam look. Lightweight, hail-resistant and kind to older rafters. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent hail and wind performance, a Class A fire rating, and profiles that mimic slate and shake on Greensboro's Tudor and Colonial homes, at far lighter weight than slate. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows, turrets and full architectural roofs: premium metals that weather to a living patina and age gracefully in humid Piedmont air. Custom fabrication for the fine details on Victorian homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or surface-rusted metal roofs: surface prep, rust and algae treatment and high-performance coating systems that extend roof life, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and porch roof transitions, the number one leak point on Greensboro roofs when summer cloudbursts and tropical rain arrive. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Greensboro gets snow and ice only now and then, so snow guards are rarely needed, but they help on steep slick roofs above entries, walkways and decks when a wet snow or ice event hits. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind, falling-limb and hurricane-remnant damage to metal roofing: thorough documentation with photos, an honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating, moss and algae growth, plus a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden thunderstorm runoff away from foundations on red-clay lots, with guards for oak leaves and pine needles. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across the Triad, from High Point furniture-district buildings to Guilford County farm and horse barns, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and slope : Larger roofs and steeper slopes require more materials and labor, increasing the overall cost.
- Material type and gauge : Premium materials like copper or stone-coated steel cost more than standard corrugated panels, and thicker gauges add durability but raise the price.
- Accessibility and roof complexity : Difficult access, multiple stories, or complex roof designs with valleys and dormers can increase labor time and cost.
- Existing roof condition and removal : If removal of old roofing is needed, or if underlying damage is found, additional labor and disposal fees apply.
What's included
- Travel included across the Greensboro area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, gather your roof dimensions, note any existing issues, and have a clear idea of your preferred material. A Greensboro Metal Roofing estimate includes a detailed breakdown of materials, labor, and any additional services, so you know exactly what to expect. Call (336) 542-5382 to schedule your free estimate and discuss your project.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type, roof size and complexity, labor costs, and additional services like old roof removal or structural repairs. We provide a detailed estimate to clarify all costs.
Do you offer free estimates, and how do I schedule one?
Yes, we offer free estimates for most services. Call (336) 542-5382 to schedule an appointment at your convenience.
What payment methods do you accept, and is financing available?
We accept cash, checks, and major credit cards. Financing options may be available, so please ask us for details when you call.