Serving the Greensboro area  ·  (336) 542-5382  ·  Open Mon-Sun 7am-7pm
📞 (336) 542-5382 Free Quote

Metal Roofing in Thomasville, NC (27360) · Local Professionals

Greensboro Metal Roofing · Fast response in Thomasville and the Greensboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (336) 542-5382
+209Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Thomasville's older homes around the Big Chair and the historic downtown carry roofs that have seen a lot of Piedmont weather. The brick mill houses and early 1900s cottages near the old furniture plants often still have original shingle roofs that are due for replacement, while newer subdivisions off Highway 109 and Business 85 mix vinyl siding with aging asphalt. If you live in 27360, you know how summer storms and falling oak limbs can turn a small leak into a ceiling stain overnight.

That's why homeowners in Thomasville call Greensboro Metal Roofing. We've worked on everything from steep Victorian roofs near the Thomasville Historic District to low-slope ranches off Randolph Street, and we know how to match a metal roof to the look of your block without overbuilding it.

Metal Roofing in Thomasville (27360)

Thomasville sits in the rolling red-clay Piedmont, and that matters for roofing. The ground here holds water after heavy rain, so proper drainage and flashing details are critical, especially on older homes with shallow eaves and brick foundations. Many properties in the 27360 ZIP code have mature trees, willow oaks and loblolly pines that drop limbs and leave shaded roof sections prone to moss and algae. We often find failed fasteners and separated seams on metal roofs that were installed years ago without proper underlayment, and we fix those before they turn into interior leaks. Steep gabled roofs on early 1900s homes require careful staging, and tight lots near downtown mean we plan material drops and crew access ahead of time.

Our team has been serving Thomasville and the greater Greensboro area for years, and we understand the local building stock, from mill village cottages to newer two-story homes. We're fully insured with general liability and workers' compensation, so you're covered if anything happens on your property.

Our services in Thomasville

How a Job Works in Thomasville

Step 1: Call us at (336) 542-5382 or request a free estimate online. We'll schedule an on-site assessment at your Thomasville property, inspect the roof and attic, and talk through options. You'll get a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we handle the work. For a full replacement, we pull the required permits with the City of Thomasville (rules vary, so we verify with the local building department). If your home is in a historic district or HOA, we help coordinate design review for panel profile and color. On tight lots near downtown, we plan staging and dumpster placement to keep your driveway and neighbor access clear.

Step 3: After installation, we clean the site thoroughly, magnet-sweep for nails, and walk the roof with you to confirm everything is done right. We don't leave until you're satisfied.

Pricing for metal roofing in Thomasville depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. For an accurate number, call (336) 542-5382 for a free estimate. We'll factor in access, urgency, and any needed decking repairs.

My mill house near the Thomasville Historic District has a steep roof and original shingles. Can you install metal without tearing everything off?
Yes, in many cases we can install a metal roof over your existing shingles if your roof structure and local code allow it. We'll inspect the decking and the number of existing layers first. For historic homes, we also check design review requirements before recommending a panel profile.
A storm just knocked a limb onto my roof off Randolph Street. How fast can you respond for emergency leak repair in Thomasville?
We offer free inspections for storm and wind damage and can usually schedule a repair quickly. Call us at (336) 542-5382, and we'll assess the damage, tarp if needed, and give you a written repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Thomasville?
For a ranch that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot installed, while standing seam runs closer to $10 per square foot. The final price depends on roof pitch, access, and whether we need to replace any decking. Call (336) 542-5382 for a free estimate.
Do I need a permit to replace my roof in Thomasville, and how long does it take?
Most full roof replacements require a permit from the City of Thomasville. Permit fees and inspection requirements vary, so we verify with the local building department before starting. Timing depends on their schedule, but we handle the paperwork and inspections for you.
My neighbor's tree hangs over my roof, and my HOA has rules about metal roof color. Can you help with approval?
We can provide material samples and documentation to submit to your HOA for approval. For property line issues, we recommend talking with your neighbor before work begins, and we can trim back limbs that overhang your roof if they're on your side of the line.
Are you fully insured for roofing work in Thomasville?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Thomasville's humid climate?
In our area, shaded roofs can grow moss and algae, so we recommend annual inspections and cleaning. We also check fasteners and seals, especially after summer storms. A coating every few years can extend the life of your roof. Call us to schedule a maintenance visit.

Nearby service areas

📍 Greensboro 27408📍 High Point 27268📍 Burlington 27201📍 Asheboro 27203
Why choose us?

Trusted professionals in Greensboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greensboro

All your work handled by qualified professionals in Greensboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

209+ Verified Client Reviews in Greensboro

⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews

Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Reidsville

“Had our old barn's exterior redone with a metal roof over the existing shingles and it looks like a brand new building. The crew knocked it out in about two days and hauled off every scrap of the old material. Honestly didn't expect it to go that smooth.”

Metal Roof Over Shingles (Retrofit)
Mike J.
⭐⭐⭐⭐⭐
MJ
Mike J.
Greensboro

“We wanted a real copper roof over the front porch and these guys delivered. The seams are tight, the patina is already starting to come through, and they treated the whole thing like a piece of art. Worth every penny.”

Copper & Specialty Metal Roofing
Jennifer M.
⭐⭐⭐⭐⭐
JM
Jennifer M.
Asheboro

“They put up the metal roofing on our new pole barn out in the country and I couldn't be happier with how solid it feels. Straight lines, no leaks, and they worked around our schedule with the livestock. Good honest crew.”

Commercial & Agricultural Metal Roofing
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Burlington

“Called them out for an inspection after a bad storm and they climbed up, checked everything, and gave me a straight answer instead of trying to sell me a whole new roof. Small flashing fix and I was good to go. Appreciate the honesty.”

Metal Roof Inspection
Robert M.
⭐⭐⭐⭐
RM
Robert M.
High Point

“Had a leak around the vent pipe on our metal roof and they tracked it down fast. Sealed it up properly and it's been bone dry through two heavy rains since. Only gripe is they were a bit late on the first visit, but the work itself was solid.”

Flashing, Chimney & Skylight Repair
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Jamestown

“Went with standing seam on our brick ranch and it completely changed the look of the house. Clean hidden fasteners, perfect color match to what we picked, and the crew cleaned up so well you couldn't tell anyone had been there. Neighbors keep asking who did it.”

Standing Seam Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Thomasville

“Full tear-off and replacement on our brick home after the old roof started failing. Three-man crew, done in three days, and they walked me through every step. The new panels look fantastic and the house is noticeably quieter in the rain.”

Metal Roof Replacement
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Archdale

“Some panels on our brick house's metal roof had worked loose and were rattling every time the wind blew. They came out, re-fastened everything and replaced a handful of screws. Quick, fair price, and the rattling's gone. Would use them again.”

Metal Roof Repair
Free Quote

Get Your Free Quote

Metal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greensboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm