Serving the Greensboro area  ·  (336) 542-5382  ·  Open Mon-Sun 7am-7pm
📞 (336) 542-5382 Free Quote

Metal Roofing in Stokesdale, NC (27357) · Local Professionals

Greensboro Metal Roofing · Fast response in Stokesdale and the Greensboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+209Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Stokesdale is the kind of place where a metal roof just makes sense: wide lots, long gravel drives, and a mix of brick ranches, farmhouses, and barns that have to stand up to whatever the Piedmont throws at them. If you live off Highway 158 near Belews Lake or out toward the Guilford County line, you already know how fast a summer storm can roll through and leave limbs on the roof.

Homeowners in Stokesdale (27357) call Greensboro Metal Roofing because we understand the local building stock, from older farmhouses that need a retrofit over shingles to newer homes that want the clean look of standing seam. We are based in Greensboro, fully insured, and we handle everything from a single leak repair to a full replacement. When the wind picks up and the rain starts sideways, you want a roofer who knows the difference between a quick patch and a real fix.

Metal Roofing in Stokesdale (27357)

Stokesdale sits on rolling red-clay ground with a lot of mature hardwoods and pines, which means two things for your roof: shade that keeps algae and moss growing, and limbs that come down in every thunderstorm. The housing mix here runs from older farmhouses and barns on acreage to 1990s and 2000s subdivision homes with low-slope shingle roofs. Many properties have long, narrow driveways or tight side yards, so we plan material staging and crew access before we ever start. On the rural edges, we often deal with wells, septic lines, and landscaping that need protection, and we take that seriously. The humid summers and occasional ice storms also mean fasteners back out and seams separate, especially on older corrugated panels. We see a lot of failed screw gaskets and flashing gaps around chimneys and skylights, and those are the leaks that show up as ceiling stains weeks later.

Our team has worked on metal roofs across Stokesdale and the surrounding Greensboro area, from small barns to large homes. We know which panel profiles hold up to wind-driven rain and which coatings handle the green algae that loves our shaded roofs. When we quote a job, we factor in the local climate and the way your property drains, not just the square footage.

Our services in Stokesdale

How a Job Works in Stokesdale

Step 1: You call us at (336) 542-5382 or request a free estimate online. We schedule an on-site assessment at a time that works for you, and we walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. We give you a written scope and a clear price before any work begins.

Step 2: Once you approve, we pull the required permits with the local building department (rules vary by jurisdiction, so we verify everything first). On installation day, we protect your landscaping and set up a safe staging area. If your property has a tight driveway or a steep grade, we plan for that. For HOA communities, we can coordinate color and profile approvals before ordering materials. We keep you updated on progress and any surprises we find under the old roof.

Step 3: We clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you know how to care for your new roof and leave your property as clean as we found it. We do not consider the job done until you are satisfied.

Pricing for metal roofing in Stokesdale depends on the size and pitch of your roof, the material you choose, and how accessible the property is. For a typical ranch or farmhouse, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a full replacement starts around $9 per square foot. If you want to go over existing shingles, retrofit pricing starts around $7 per square foot, but keep in mind local code limits how many layers you can cover. Corrugated and ribbed panel roofing is our most economical option at about $5.50 per square foot, and it is popular for barns and outbuildings. Smaller repairs, like fixing a leak or replacing fasteners, start at $450, and screw replacement and re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect. Call (336) 542-5382 to schedule yours.

My Stokesdale farmhouse has original shingles and I want to avoid a full tear-off. Can you install metal over them?
In many cases, yes. We can install a metal roof over existing shingles if the structure is sound and the number of layers meets local code. We will inspect your roof deck and let you know if a retrofit is a good option for your home. This can save time and money, but we always verify with the local building department first.
A storm just knocked a limb onto my roof off Highway 158. How fast can you get out for emergency repairs?
We prioritize storm damage calls in Stokesdale and the surrounding area. Call us at (336) 542-5382 and we will schedule the earliest available inspection, often within 24 to 48 hours depending on demand. We can tarp or secure the area to prevent further damage and provide a written estimate for permanent repairs.
What is the typical cost to replace a metal roof on a 1,500-square-foot home in Stokesdale?
For a home that size, a basic corrugated panel roof might start around $8,000 to $10,000, while standing seam could run $15,000 or more. The exact price depends on roof complexity, pitch, panel type, and whether we need to remove existing layers. We give free estimates so you get a number that fits your specific property.
Do I need a permit to replace my roof in Stokesdale, and who handles it?
Yes, roofing permits are commonly required for a full replacement or re-roof in Stokesdale and Guilford County. Requirements and fees vary, so we verify with the local building department before starting. We can handle the permit application and inspection process for you as part of the job.
My neighborhood has an HOA, and I am worried about getting approval for a metal roof. Can you help with that?
We can provide material samples, color chips, and specification sheets to submit to your HOA for approval. We recommend getting approval before ordering materials to avoid delays. If there are property line concerns, we follow local setback rules and can adjust the design to keep everything compliant.
Are you fully insured for work at my Stokesdale property?
Yes, we carry general liability insurance and workers' compensation coverage for every job.
What maintenance does a metal roof need in Stokesdale's humid climate?
We recommend an annual inspection to check fasteners, flashing, and seams, especially after storm season. Keep gutters clear of pine needles and leaves, and wash off any algae or moss that develops on shaded sections. Addressing small issues early prevents bigger leaks, and we offer maintenance plans and inspections.
Why choose us?

Trusted professionals in Greensboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greensboro

All your work handled by qualified professionals in Greensboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

209+ Verified Client Reviews in Greensboro

⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greensboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm