Serving the Greensboro area  ·  (336) 542-5382  ·  Open Mon-Sun 7am-7pm
📞 (336) 542-5382 Free Quote

Metal Roofing in Randleman, NC (27317) · Local Professionals

Greensboro Metal Roofing · Fast response in Randleman and the Greensboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+209Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Randleman is a small city with a big history, and you can see it in the roofs. The old mill houses near the center of town and the brick storefronts along Main Street still carry their original or second-generation roofs, while the neighborhoods off High Point Street and down toward Randleman Lake mix ranches, farmhouses, and newer builds. The rolling red clay and tall pines mean shade, moss, and falling limbs are part of life here.

Homeowners in Randleman (27317) call Greensboro Metal Roofing because we know these roofs. We have worked on mill-village homes with steep gables, small shops with flat or low-slope metal, and rural properties where a barn roof takes a beating from storms. We are based in Greensboro and serve Randleman and the surrounding areas, and we are fully insured with general liability and workers' compensation.

Metal Roofing in Randleman (27317)

Randleman sits in the Piedmont, and the ground here is red clay that holds water after a hard rain. That matters for metal roofing because proper drainage and flashing details keep water from backing up under panels or rusting fasteners. Many homes in Randleman are older mill houses with steep roofs and deep porches, and some have been re-roofed multiple times. We often find layers of shingles that need to come off before a new metal roof goes on, and we check the decking for soft spots. The tall pines and oaks around town drop limbs and needles, which can clog gutters and scratch painted metal. We install and repair metal roofs that handle this climate: standing seam, corrugated panels, metal shingles, and stone-coated steel. For older homes, we can also do a metal roof over shingles if the existing layers are within code limits.

Our team has worked across Greensboro and the surrounding areas, including Randleman, and we understand the local building stock. Whether it is a small bungalow near the old mill or a commercial building on the edge of town, we bring the same approach: solid materials, proper fastening, and clean flashing details.

Our services in Randleman

How a Job Works in Randleman

Step 1: You call us at (336) 542-5382 or request a free estimate online. We schedule a time to come out and inspect your roof. We look at the current roof condition, the decking, flashing, and how water drains. If there is storm damage, we document it for your insurance claim. We give you a written estimate with options and answer your questions.

Step 2: Once you approve, we pull the required permits from the local building department. Permit requirements vary, so we verify with the city or county before starting. We order materials and schedule the work. On the day, our crew protects your landscaping and moves carefully around tight spots, like narrow driveways or close property lines. If your home is in a historic district or HOA, we coordinate any design review before ordering panels.

Step 3: After the work is done, we clean up thoroughly. We walk the property with you, check the roof and gutters, and make sure you are satisfied. We do not leave nails or scraps behind. We also provide documentation for your records and warranty information.

Pricing for metal roofing in Randleman depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. These are starting prices, and your final quote will reflect factors like roof pitch, access, number of penetrations, and whether old layers need removal. We provide free estimates, so call (336) 542-5382 to get a clear price for your Randleman home.

My mill house near downtown Randleman has a steep roof and several layers of old shingles. Can you install metal over them?
It depends on how many layers are there and what the local code allows. North Carolina building code limits the number of shingle layers you can cover, and steep roofs may need special fastening. We inspect the decking and layers first, then let you know if a retrofit is possible or if a full tear-off is the better option. We handle both.
A storm just knocked a limb onto my metal roof in Randleman. How fast can you respond?
We offer free storm and wind damage inspections. Call us at (336) 542-5382, and we will schedule a visit as soon as possible. If there is an active leak, we can often provide temporary protection until we complete the repair. We document the damage for your insurance claim.
What does a typical metal roof repair cost in Randleman?
Most repairs start at $450, but the final cost depends on what is wrong. A simple leak around a flashing might be on the lower end, while a larger repair involving multiple panels or fasteners could be more. We give you a written estimate before any work begins.
Do I need a permit for a metal roof in Randleman, and who handles it?
Yes, a permit is commonly required for a full replacement or re-roof. The City of Randleman or Randolph County issues permits, and requirements can vary. We verify the rules with the local building department and can pull the permit for you as part of the job.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter and downspout placement to direct water away from the property line. If your home is in an HOA, we also help with design approval for panel profile and color. It is best to check your plat or survey for exact property lines before we start.
Are you insured for work on my Randleman property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Randleman's climate?
Because of the humidity and shade from pines and oaks, we recommend annual inspections to check for moss, debris in gutters, and loose fasteners. Coating or painting every few years can extend the life of painted panels. We offer maintenance plans and free estimates for any work you need.
Why choose us?

Trusted professionals in Greensboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greensboro

All your work handled by qualified professionals in Greensboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

209+ Verified Client Reviews in Greensboro

⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greensboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm