Serving the Greensboro area  ·  (336) 542-5382  ·  Open Mon-Sun 7am-7pm
📞 (336) 542-5382 Free Quote

Metal Roofing in Reidsville, NC (27320) · Local Professionals

Greensboro Metal Roofing · Fast response in Reidsville and the Greensboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+209Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Reidsville's tobacco-era homes and brick ranches are built to last, but their roofs take a beating from Piedmont heat, humidity, and falling limbs. If you live near the old American Tobacco Company plant or in one of the tree-lined neighborhoods off Scales Street, you know how fast a shaded roof turns green with moss and how a summer storm can send a pine branch through aging shingles.

That's why homeowners in Reidsville (27320) call Greensboro Metal Roofing. We're based in Greensboro, just up the road, and we know the housing stock here: 1920s bungalows with steep gables, 1950s brick ranches with low-slope roofs, and newer builds that need a metal roof to stand up to decades of humid summers. We're fully insured, and we treat every Reidsville property like it's in our own backyard.

Metal Roofing in Reidsville (27320)

Reidsville sits in the rolling red-clay Piedmont, and that clay matters. It holds water after heavy rain, so proper drainage and gutter sizing are critical, especially on older lots where the ground has settled around the foundation. Many homes here have mature willow oaks and loblolly pines close to the house, which means shade, moss, and the constant risk of fallen limbs. The housing mix is just as varied: you'll find 1920s Craftsman bungalows near downtown, 1950s brick ranches with low-pitched roofs in neighborhoods off Freeway Drive, and farmhouses on the rural edges of Rockingham County. Each one needs a different approach, from standing seam on a steep Victorian roof to corrugated panels on a barn or a retrofit over existing shingles on a ranch.

Our team has worked on roofs across Reidsville and the surrounding areas, and we understand the local building department's permitting process. We also know how to handle the tight access on some of the older streets near the historic district, where mature trees and narrow driveways can make material delivery a challenge. Whether it's a full replacement, a repair, or a coating to extend the life of an older metal roof, we bring the right equipment and experience to get it done right.

Our services in Reidsville

How a Job Works in Reidsville

Step 1: It starts with a phone call to (336) 542-5382 or a request through our website. We schedule a free on-site assessment at your Reidsville property, where we inspect the roof, check for leaks, loose fasteners, and flashing issues, and talk through your options. You'll get a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we pull the necessary permits from the City of Reidsville (or Rockingham County if you're outside city limits) and schedule the work. On installation day, our crew arrives early, protects your landscaping, and gets to work. If your home is in a historic district or HOA, we coordinate any design approvals ahead of time so there are no surprises. For tight lots, we plan material staging carefully to avoid blocking neighbors' driveways.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the property with you, show you the finished work, and make sure you're satisfied before we leave. We leave your property clean and your roof ready for whatever Reidsville weather throws at it.

Pricing for metal roofing in Reidsville depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. Coating and painting can extend the life of an older metal roof for as little as $2.50 per square foot. We always provide a free estimate so you know exactly what to expect. Call (336) 542-5382 to schedule yours.

My 1950s brick ranch off Freeway Drive has a low-pitched roof. Can you install metal over the existing shingles?
Yes, in many cases we can do a metal roof over shingles (retrofit) if your roof structure can handle the added weight and your local code allows it. We'll inspect your roof deck and let you know if a retrofit is a good option for your home. This can save you money on tear-off and disposal.
A storm just knocked a limb onto my roof near the Reidsville historic district. How fast can you respond?
We offer free inspections for storm and wind damage. Call us at (336) 542-5382, and we'll schedule a visit as soon as possible to assess the damage and provide a repair estimate. We prioritize emergency leaks and storm damage to prevent further issues.
What's the typical cost to repair a metal roof leak in Reidsville?
Most metal roof leak repairs start around $450, but the final cost depends on the source of the leak, accessibility, and whether flashing or fasteners need replacement. We'll give you a firm quote after a free inspection.
Do I need a permit to replace my roof in Reidsville?
Yes, the City of Reidsville typically requires a permit for roof replacements. The requirements and fees can vary, so we always verify with the local building department before starting work. We handle the permitting process for you.
My neighbor's tree hangs over my roof. What are my rights, and do I need HOA approval for a metal roof?
Property line issues with overhanging branches are a civil matter between neighbors, but we can advise on how to protect your roof. If you're in an HOA, you'll need approval for the metal roof style and color. We can provide documentation to help with the approval process.
Are you fully insured for roofing work in Reidsville?
Yes, we carry general liability insurance and workers' compensation coverage.
How often should I have my metal roof inspected in Reidsville's humid climate?
We recommend an inspection every 2-3 years, especially if your roof is shaded by trees. Moss and algae can grow on shaded roofs, and fasteners can loosen over time. A periodic inspection and cleaning can extend the life of your roof and prevent costly leaks.
Why choose us?

Trusted professionals in Greensboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greensboro

All your work handled by qualified professionals in Greensboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

209+ Verified Client Reviews in Greensboro

⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greensboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm