Serving the Greensboro area  ·  (336) 542-5382  ·  Open Mon-Sun 7am-7pm
📞 (336) 542-5382 Free Quote

Metal Roofing in Kernersville, NC (27284) · Local Professionals

Greensboro Metal Roofing · Fast response in Kernersville and the Greensboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+209Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kernersville sits right where the Triad's western edge starts rolling toward the Blue Ridge, and the housing stock tells that story block by block. You've got 1950s and 60s brick ranches on low-pitch shingle roofs, newer vinyl-and-brick subdivisions off Union Cross and Hopkins Road, and farmhouses and barns out toward Beeson Road and the county line. Tall pines and willow oaks hang over a lot of these roofs, and that's exactly why we get called.

Homeowners in 27284 call Greensboro Metal Roofing because we know what Kernersville weather does to a roof. Hail comes through in spring and summer storms, limbs drop in the fast thunderstorms that roll across the Piedmont, and shaded north slopes grow moss and algae year after year. We're based in Greensboro, fully insured, and we handle everything from a $450 leak repair to a full standing seam install. If you're near Fourth of July Park or out past the I-40 interchange, we can be on your roof for a free look.

Metal Roofing in Kernersville (27284)

Kernersville's terrain is rolling red-clay Piedmont, and that matters more than people think. On sloped lots, water runs fast and finds the low side of the house, so gutter sizing and downspout placement have to be right or you get foundation moisture and erosion. On the flat lots in the older neighborhoods, drainage is more about soil saturation after a heavy storm. Access is another local factor: some of the older streets have narrow drives and mature trees close to the roofline, which means we plan panel staging and ladder placement before we ever pull up. And the housing mix means we work on everything from a low-slope 1960s ranch that's a good candidate for a metal roof over shingles to a steeper gabled home where standing seam makes more sense.

Our team has been serving Kernersville and the surrounding Greensboro area long enough to know which neighborhoods see more limb fall, where hail tends to hit hardest on the west side of town, and which HOAs want a specific panel profile and color. We handle stone-coated steel, standing seam, corrugated and ribbed panels, metal shingles, and copper and specialty metal. We also do storm and wind damage repair, leak repair, screw replacement and re-fastening, and gutters sized for metal roofs. If your roof is older and you're weighing repair versus replacement, we'll give you a straight answer, not a sales pitch.

Our services in Kernersville

How a Job Works in Kernersville

Step 1 is a free on-site assessment. You call (336) 542-5382, we set a time that works, and we walk the roof and the attic if needed. We look at the panels or shingles, the fasteners, the flashing, the chimney and skylight details, the gutters, and the decking where we can see it. Then we give you a written scope and a price, and we explain what's urgent versus what can wait.

Step 2 is the work itself. In Kernersville, that often means coordinating with the local building department for a permit on a full replacement or re-roof, and if you're in an HOA, we help you get the panel profile and color approved before we order material. On tight lots with trees close to the house, we stage panels carefully and use the right fall protection. If we're doing a metal roof over existing shingles, we verify the number of layers first because code limits how many you can cover.

Step 3 is cleanup and a final walkthrough. We magnet-sweep the yard and driveway for screws and metal shavings, haul away old material, and walk the finished roof with you. We don't leave until you've seen the details and you're satisfied with the cleanup.

Pricing in Kernersville depends on the size and pitch of your roof, how many layers are coming off, access, and the condition of the decking and flashing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper and specialty metal at $20. Repairs start at $450 for a leak or general repair, screw replacement and re-fastening at $750, flashing and chimney or skylight repair at $600, and gutters at $9 per linear foot. Storm and wind damage inspections are free, and so are general metal roof inspections. The best way to get a real number for your house is to call (336) 542-5382 and set up a free estimate.

My 1960s brick ranch off Hopkins Road has two layers of shingles. Can you put a metal roof over them?
Maybe. Code limits how many existing layers you can cover, and two is often the maximum, but it depends on the condition of the shingles and the decking underneath. We inspect first, confirm the layer count, and check for soft spots or rot. If the shingles are curling or the deck is compromised, a tear-off is the safer route. We'll tell you which one makes sense for your house.
A storm just dropped a limb on my roof near Fourth of July Park. How fast can you get out?
Call (336) 542-5382 and we'll schedule a free storm and wind damage inspection as soon as we can, usually within a day or two depending on how many calls are coming in after the same storm. We tarp active leaks if needed, document the damage for your insurance claim, and give you a written repair estimate. We never promise coverage, but we do give you the paperwork your adjuster will want.
What does a typical metal roof replacement cost in Kernersville?
Most full replacements in 27284 land somewhere between the low teens and mid twenty-thousands, depending on square footage, pitch, how many layers come off, and whether you choose corrugated, standing seam, or stone-coated steel. A small ranch with simple lines is on the lower end; a two-story with dormers, valleys, and a steep pitch is higher. Repairs are much less, starting at $450. We give a fixed written price after the free inspection.
Do I need a permit for a metal roof in Kernersville, and who handles it?
A full replacement or re-roof commonly requires a permit, and thresholds and fees vary by jurisdiction. We pull the permit and coordinate the inspection as part of the job. If your home is in a historic district or an HOA, there can be design review on panel profile and color, and we help you get that approval before ordering material. Always verify current rules with the local building department, since they can change.
My neighbor says my new metal roof's drip edge crosses the property line. What do we do?
Property line issues come up on tight lots. We set the roof and gutters to discharge on your side and stay within the footprint of the structure. If there's a dispute, a survey is the right first step, and we'll work with whatever the survey shows. For HOAs, we submit the panel profile and color for approval before installation so there are no surprises after the fact.
What kind of insurance coverage do you carry for work at my Kernersville home?
We are fully insured with general liability and workers' compensation. That means if a worker is injured on your property or something is damaged during the job, you're not exposed. We're happy to provide a certificate of insurance before we start, and we recommend asking any contractor for one.
What should I do about moss and algae on my shaded north roof slope in Kernersville?
Shade from pines and oaks plus our humid summers makes moss and algae common on north slopes here. For a metal roof, a periodic wash and a manufacturer-approved coating or paint (starting at $2.50 per square foot) keeps it looking good and protects the finish. For shingle roofs, we don't recommend pressure washing. We inspect, clean, and tell you if the growth is cosmetic or if it's trapping moisture and shortening the roof's life.
Why choose us?

Trusted professionals in Greensboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greensboro

All your work handled by qualified professionals in Greensboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

209+ Verified Client Reviews in Greensboro

⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greensboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm