Serving the Greensboro area  ·  (336) 542-5382  ·  Open Mon-Sun 7am-7pm
📞 (336) 542-5382 Free Quote

Metal Roofing in Graham, NC (27258) · Local Professionals

Greensboro Metal Roofing · Fast response in Graham and the Greensboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+209Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Graham is a courthouse town where the housing stock tells its age by the block: 1920s brick ranches and mill cottages near the old downtown, steep-roofed Victorians and Craftsman bungalows on the tree-lined streets off Elm, and newer vinyl-and-brick subdivisions out toward I-85/40. If your shingle roof is showing its age against that red Piedmont clay and humid summer sky, we can help.

Greensboro Metal Roofing installs, repairs, and replaces metal roofs throughout Graham and ZIP 27258. We know the courthouse square, the shade trees along North Main, and the way afternoon storms roll in off the interstate. Call (336) 542-5382 for a free on-site estimate.

Metal Roofing in Graham (27258)

Graham sits on rolling red-clay ground where water moves fast after a storm. Older homes near downtown often have steep gabled roofs with deep porches, and those porch roofs and valleys are where we find the most flashings pulled loose by fallen limbs or clogged with pine straw. Brick ranches on the south and east sides usually have low-pitched shingle roofs that are prime candidates for a metal retrofit, but the decking underneath has to be checked for soft spots before we screw down panels. Tight lots near the courthouse mean we plan panel staging and dumpster placement carefully so we do not block a neighbor's drive or a sidewalk. And because Graham has a historic district and several HOAs, we check panel profile and color rules before we order material, not after.

Our team has worked across the Greensboro area for years, from Fisher Park Victorians to Summerfield subdivision homes. In Graham we handle everything from a single leak repair at a mill cottage to a full standing seam replacement on a brick ranch. We are fully insured with general liability and workers' compensation, and we pull the permits the local building department requires.

Our services in Graham

How a Job Works in Graham

Step 1: You call (336) 542-5382 or request a free estimate online. We schedule an on-site assessment, walk the roof and attic with you if you want, and check the decking, flashing, and gutters. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we handle the permit paperwork with the local building department and coordinate any historic district or HOA review. On installation day we protect your landscaping, stage panels where they will not block the street or a neighbor's driveway, and keep the crew moving so your roof is dried in before the next Piedmont thunderstorm. For repairs we match fasteners and flashing to your existing metal and test the fix with water before we leave.

Step 3: We clean the site, magnet-sweep for screws and nails, haul away old material, and walk the finished roof with you. You get a final inspection sign-off and a clear explanation of what was done and how to maintain it.

Metal roofing in Graham is priced by the square foot, and the numbers depend on the profile, the pitch, the condition of the decking, and how tight the access is. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and standing seam starts around $10 per square foot. A basic metal roof repair or leak repair starts around $450, and screw replacement and re-fastening starts around $750. Stone-coated steel and metal shingle roofs start around $9 per square foot, and copper or specialty metal starts around $20. We give you a free estimate at (336) 542-5382 so you know the real number for your Graham property, not a guess.

My brick ranch near the Graham courthouse square has a low-pitched shingle roof. Can you install metal over it, or does the old roof have to come off?
Many low-slope ranches in Graham can take a metal retrofit over one layer of shingles, but the code limits how many layers you can leave in place, and the decking has to be sound. We inspect the attic and decking first, then tell you whether a retrofit or a full tear-off is the right call for your house.
A storm just dropped a limb on my roof in Graham and I have water coming in. How fast can you get out?
We offer free storm and wind damage inspections and prioritize active leaks. Call (336) 542-5382, describe the damage, and we will schedule the soonest available visit to tarp or repair the opening so the water stops spreading. We also document the damage for your insurance claim.
What does a typical metal roof replacement cost for a 1,500-square-foot home in Graham?
For a home that size, most Graham replacements land in the range of the per-square-foot prices above, so a standing seam job might start around $10 per square foot and a corrugated panel job around $5.50 per square foot, before factors like pitch, decking repairs, and access. We give you a free written estimate at (336) 542-5382.
Do I need a permit for a metal roof replacement in Graham, and does the historic district affect what I can install?
Roofing permits are commonly required for a full replacement or re-roof in Graham, and thresholds and inspection requirements vary. If your property is in the historic district or an HOA, design review can restrict panel profile and color. We check with the local building department and any design review board before ordering material, and we handle the permit paperwork for you.
My neighbor's tree drops limbs on my roof and we share a property line. Who is responsible, and will my HOA approve a metal roof?
Property line and tree responsibility questions are usually civil matters between neighbors, so we stay out of that dispute and focus on the roof. For HOA approval, we provide panel samples and specification sheets you can submit to your board, and we can adjust the profile or color to meet the association's rules.
Are you fully insured for work at my Graham property?
Yes. Greensboro Metal Roofing carries general liability and workers' compensation insurance.
What maintenance does a metal roof need in Graham's humid summers and occasional ice storms?
Keep gutters and valleys clear of pine straw and leaves, especially under the tall loblolly pines common around Graham. Check fasteners and flashing once a year, and after a hail or wind storm look for lifted panels or dented ridges. A metal roof coating every several years helps in shaded areas where moss and algae want to grow, and snow guards are worth considering if your eaves ice up.
Why choose us?

Trusted professionals in Greensboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greensboro

All your work handled by qualified professionals in Greensboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

209+ Verified Client Reviews in Greensboro

⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greensboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm