Serving the Greensboro area  ·  (336) 542-5382  ·  Open Mon-Sun 7am-7pm
📞 (336) 542-5382 Free Quote

Metal Roofing in Summerfield, NC (27358) · Local Professionals

Greensboro Metal Roofing · Fast response in Summerfield and the Greensboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+209Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Summerfield is not a place where a roof gets ignored. Big two-story homes on wooded lots off Scalesville Road and Summerfield Road, farm properties with barns and outbuildings, and newer subdivisions tucked between the oaks and pines all take a beating from Piedmont hail and summer storms. If your roof is showing its age or you just got hit, we are the local crew that knows this ZIP code.

Homeowners in 27358 call Greensboro Metal Roofing because we understand the mix here: large, complex rooflines on newer homes, metal shingles that need to match HOA expectations, and storm damage that has to be documented right the first time. We are based in Greensboro, fully insured, and we work Summerfield every week.

Metal Roofing in Summerfield (27358)

Summerfield sits on rolling red-clay ground with tall pines and hardwoods close to the house, and that shapes the work. Many properties here are on wells and septic, so we watch where we stage materials and how we clean up. Driveways are often long and gravel, and some lots slope enough that we plan panel delivery and ladder placement before we ever pull in. The newer homes around Summerfield Elementary and the older farm properties out toward Bunch Road have very different roof pitches, but both see the same problems: hail dents on metal shingles, wind-lifted panels after a fast thunderstorm, and gutters packed with pine needles and oak tassels every spring.

Our team has installed and repaired standing seam, metal shingle, and stone-coated steel across Summerfield and the surrounding Greensboro area. We know which panel profiles and colors tend to pass HOA review here, and we know how to tie new metal into the brick and vinyl exteriors common in the newer subdivisions.

Our services in Summerfield

How a Job Works in Summerfield

Step 1: You call (336) 542-5382 or request a free estimate. We schedule an on-site assessment, walk the roof and the attic if needed, and look at flashing, fasteners, and seams. You get a written scope and a clear price before anything starts.

Step 2: Once you approve, we pull the required roofing permit with the local building department and coordinate any HOA design review. On tight lots or long gravel drives, we plan delivery and staging so we do not block your neighbors or tear up the yard. Most metal roof installations and replacements take a few days to a week depending on size and weather.

Step 3: We clean the site daily, run a magnet for nails, and do a final walkthrough with you. We leave your property clean and show you what was done, including photos of the finished work for your records.

Pricing in Summerfield depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles retrofit at $7. Metal shingle and stone-coated steel both start at $9 per square foot, and corrugated or ribbed panel roofing starts at $5.50. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Storm and wind damage inspections are free, and we document everything for your insurance claim. Call (336) 542-5382 for a free estimate on your Summerfield property.

My Summerfield home has a complex roofline with multiple valleys and dormers. Can you handle metal shingles on that?
Yes. The newer two-story homes around Summerfield often have several roof planes, valleys, and dormers, and metal shingles work well there when the underlayment and flashing are detailed correctly. We measure every plane and plan the layout so cuts and seams land where they should.
A storm just knocked limbs onto my roof in Summerfield. How fast can you get out for storm and wind damage repair?
Call (336) 542-5382 and we will schedule a free inspection as soon as possible, usually within a day or two depending on storm volume. We tarp active leaks if needed, document the damage for your insurer, and give you a written repair estimate before work begins.
What does a typical metal roof replacement cost for a Summerfield home in 27358?
Most full replacements here start around $9 per square foot for metal roofing, with standing seam and specialty products running higher. The final number depends on square footage, roof pitch, how many layers need to come off, and whether gutters or flashing need replacing. We give you a firm written price after the free estimate.
Do I need a permit to replace my roof in Summerfield, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Summerfield, and the rules vary by jurisdiction. We verify the current requirements with the local building department and pull the permit for you as part of the job. We never guess on code thresholds.
My HOA has design rules. Can you help with approval for a metal roof in Summerfield?
Yes. Many Summerfield subdivisions have architectural review, and we can provide panel profiles, color samples, and manufacturer spec sheets for your HOA packet. We also respect property line setbacks and coordinate with neighbors on staging so the job stays clean on both sides of the fence.
Are you fully insured for roof work at my Summerfield property?
Yes. Greensboro Metal Roofing carries general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Summerfield's climate?
The main things here are keeping gutters clear of pine needles and oak debris, checking fasteners after big storms, and washing off pollen and algae that build up on shaded roof planes. An annual inspection, especially after hail season, catches small issues before they become leaks. We offer inspections and coating services to keep the roof performing.
Why choose us?

Trusted professionals in Greensboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greensboro

All your work handled by qualified professionals in Greensboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

209+ Verified Client Reviews in Greensboro

⭐⭐⭐⭐⭐ 4.9/5 · 209 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greensboro · Response within 24h · No commitment · ☎ (336) 542-5382

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greensboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm